Call 08048600851 53% Response Rate

our range

Ultrasonic Flow Meter

Pioneers in the industry, we offer ultra 4 advance ultrasonic level, flow, volume, & pump control, acoustic sensor for non invasive solids flow detection pulsargurard 2010, advance flow,level,volume,&pump control, sfm 6.1 slurry flow meter, dfm 6.1 doppler flow meter and flowpluse sensor non invasive , clamp-on, flow sensor from India.
  • Ultra 4 Advance Ultrasonic Level, Flow, Volume, & Pump Control
  • Ultra 4 Advance Ultrasonic Level, Flow, Volume, & Pump Control
  • Ultra 4 Advance Ultrasonic Level, Flow, Volume, & Pump Control
Ultra 4 Advance Ultrasonic Level, Flow, Volume, & Pump Control

Ultra 4 Advance Ultrasonic Level, Flow, Volume, & Pump Control

Price on Request

Product Brochure

BrandPulsar / Greyline
Flow Media TypeWater
DisplayDigital
Accuracy0.25% of the measured range or 6mm (whichever is greater) +/- 2 mm (0.079 in) for dBR16 mmWAVE RADAR
Frequency50 Hz
Voltage250 V
Resolution0.1% of the measured range or 2 mm (0.079 in); whichever is greater
Transducer Cable Extensions3-core Screened
Cable Entry Detail3 x M20 glands
Enclosure Material/DescriptionPolycarbonate, flame resistant to UL94-V0
IP RatingIP67/NEMA 4X for wall mount IP64 for fascia mount
DimensionsWall Mount: 150 mm x 130 mm x 63.5 mm (5.9 in x 5.1 in x 2.5 in) Fascia Mount: 160 mm x 180 mm x 63
Volt Free Contacts, Number, and Rating3 x SPCO isolated relays, rated at 5 A at 250 V AC and 1 Solid-state SPNO isolated relay, rated 30
Analog OutputIsolated floating output (to 150 V) of 4-20mA or 0-20mA into 1; user-programmable and adjustable
Weight700g (1.5 lbs)
The Ultra 4 is a fully functional advanced controller for level, flow, volume, and pump control. MCERTS Class 1 certified, the Ultra 4 offers open channel flow measurement for stormwater overflows and event duration monitoring.                                                                                                      FEATURES                                               
  • Built-in volume calculations from standard tank shapes or calibration curves
  • 32 GB Micro SD Card
  • Echo profiles and level trend graphs are shown on the built-in display
  • RS485 Modbus/Profibus option
  • Radar or Ultrasonic measurement technology
  • 4 onboard relays assignable by type
  • Wall or Fascia Mount 
  • mA Output
  • The ability to measure pump control, flow measurement, and volume measurement in one compact unit
  • Quick set up features allow the easy programming of parameters
           

View Complete details

get quote request a call back
  • Acoustic Sensor For Non Invasive Solids Flow Detection PULSARGURARD 2010
  • Acoustic Sensor For Non Invasive Solids Flow Detection PULSARGURARD 2010
  • Acoustic Sensor For Non Invasive Solids Flow Detection PULSARGURARD 2010
  • Acoustic Sensor For Non Invasive Solids Flow Detection PULSARGURARD 2010
  • Acoustic Sensor For Non Invasive Solids Flow Detection PULSARGURARD 2010
Acoustic Sensor For Non Invasive Solids Flow Detection PULSARGURARD 2010

Acoustic Sensor For Non Invasive Solids Flow Detection PULSARGURARD 2010

Price on Request
MaterialPlastic Body
Usage/ApplicationAutomotive
BrandPulsar / Greyline
Model Name/NumberPULSARGUARD 2010
Flow Media TypeWater
DisplayDigital
Electronics Enclosure4 core screened value
Frequency50 Hz
Voltage240 V
ColorRed and Blue
Size125 mm (4.92 in) long
Weight640 g (1.41 lbs)
ConstructionCap and base housing in 316 stainless steel
Sensor MountingTab with 14 mm (0.55 in) hole
Cable4 m (13 ft)of 4 core shielded 24AWG
"We are looking for inquiries from Central India, Mainly from Maharashtra, Chhattisgarh , Madhya Pradesh. We are star supplier of Acoustic Sensors For Material Flow Monitoring. The sitrans as 100 acoust ic sensor detects high frequency acoustic emissions from friction or the impact of dust, powders,granules and other solids in motion. It signals flow/no flow or high/low flow. It features compact stainless steel construction for harsh environments and non-invasive mounting.

  • Non-invasive and maintenance-free
  • Simple bolt-on installation
  • Low cost
  • No moving parts and vibration resistant
  • IP68 Stainless Steel housing
  • Highly reliable in low or high temperature
  • ATEX Flammable atmosphere approved (2011 option only)

View Complete details

get quote request a call back
  • Advance Flow,Level,Volume,&Pump Control
  • Advance Flow,Level,Volume,&Pump Control
  • Advance Flow,Level,Volume,&Pump Control
  • Advance Flow,Level,Volume,&Pump Control
Advance Flow,Level,Volume,&Pump Control

Advance Flow,Level,Volume,&Pump Control

Price on Request
MaterialPlastic Body
BrandPulsar / Greyline
Application MediaWater
DisplayDigital
Accuracy0.25% of the measured range or 6mm (whichever is greater) +/- 2 mm (0.079 in) for dBR16 mmWAVE RADAR
Electronics EnclosurePolycarbonate, flame resistant to UL94-V0
Frequency50 Hz
Voltage250 V AC
IP RatingIP67/NEMA 4X for wall mount IP64 for fascia mount
DimensionsWall Mount: 150 mm x 130 mm x 63.5 mm (5.9 in x 5.1 in x 2.5 in) Fascia Mount: 160 mm x 180 mm x 63
Cable Entry Detail3 x M20 glands
Operating Temperature-20 degree to +45 degree
Weight700 Kg (1.5 Ibs)
Resolution0.1% of the measured range or 2 mm (0.079 in); whichever is greater
Transducer Cable Extensions3-core Screened
The multifunctional display offers the ability to view trend graphs on-screen and get a glance at how levels have changed over time. When combined with the dB3 with double sun shields, the Ultra 4 achieves MCERTS Class 1 certification, with 0.193% combined accuracy, meaning the system has undergone rigorous testing and has achieved a high standard in every single one. This means that wastewater processes across the world can achieve a common standard on their flow applications, providing real-time data on flow into storm tanks, influent flow, and event duration monitoring.

View Complete details

get quote request a call back
  • SFM 6.1 Slurry Flow Meter
  • SFM 6.1 Slurry Flow Meter
  • SFM 6.1 Slurry Flow Meter
  • SFM 6.1 Slurry Flow Meter
  • SFM 6.1 Slurry Flow Meter
SFM 6.1 Slurry Flow Meter

SFM 6.1 Slurry Flow Meter

Rs 3.25 Lakh  / PieceGet Best Price

Product Brochure

Accuracy+/-2% of reading or 0.1 ft/sec (0.03 m/sec)
CalibrationBuilt-in 5-key calibrator with English, Spanish or French language selection
EnclosureNEMA4 stainless steel with window
OutputIsolated 4-20mA (1000 ohm load max.)
Flow Rate Range+/- 0.1 to 40 ft/sec (+/- 0.03 to 12.2 m/sec) in most applications
Electrical Surge ProtectionSensor, 4-20mA output and AC power input
Shipping Weight21 lbs (10 kg)
DisplayWhite, backlit matrix - displays flow rate, relay states, 16-digit totalizer, operating mode and cal
Power Input100-240VAC 50-60Hz (see Options), 2.4-5.6 Watts depending on options
Electronics Operating Temperature-10 deg to 140 degF (-23 deg to 60 degC)
SensitivityAdjustable. Damping adjustable
Control RelaysQty 2, rated 5 amp SPDT, programmable flow alarm and/or proportional pulse
Pipe SizeAny pipe ID from 1/2'' to 180'' (12.7 mm to 4.5 m)
Description:
  • Non-contacting flow monitoring specifically designed for limestone slurry, fly ash slurry, gypsum slurry and many others
  • The Greyline SFM 6.1 was specifically developed for the slurry applications found in today’s coal fired power plants. Using a proprietary algorithm specifically designed for measuring slurry flow, the SFM 6.1 incorporates more than 25 years of Greyline ultrasonic flow measurement experience.
  • The SFM 6.1 Slurry Flow Meter works best in applications that would defeat regular contacting flow meters. Because the Sensor is mounted on the outside of the pipe, it is unaffected by abrasive slurries or harsh chemicals. There is no obstruction to flow and no pressure drop.

Easy to Install:
  • Each SFM 6.1 Slurry Flow Meter includes a strap-on ultrasonic sensor, an adjustable stainless steel mounting clamp and sensor coupling compound. The sensor fits on the outside of any pipe diameter ½" (12.7 mm) or larger. It takes just a few minutes to install. There is no need to shut down flow.

Special Features:
  • Digital processing system tracks flow signals accurately and auto-zeroes with signal loss
  • Noise suppression circuitry filters “dirty” power and electrical interference from most VFD's
  • Automatically converts between measurement units (e.g. gallons or liters)
  • Calibration data and Totalizer values are stored automatically during power interruptions
  • Output “simulation” function simplifies calibration of remote devices (e.g. chart recorders or controllers)
  • Self-tunes to Sensor cable length
  • Optimized for Slurries
  • Easy, Intuitive Set-Up
  • 5 Button Menu System
  • Isolated 4-20mA Output
  • Up to 6 Control Relays
  • Optional Built In Data Logger

Slurry Flow Meter Specifications:Scope:
  • This specification covers a non-intrusive, ultrasonic Doppler-type slurry flow meter as manufactured by Greyline Instruments Inc., Largo, Florida / Long Sault, Ontario. The instrument shall provide for velocity or volumetric indicating and transmitting of the flow rate in a full pipe.

Performance Specifications:
  • The flow meter shall operate with a single-head flow sensor mounted externally on any contiguous pipe material that conducts sound including: carbon steel, stainless steel, ductile iron, copper, FRP, PVC, ABS, or cement lined pipe from 1/2" to 180" (12.5 mm to 4.5 m) ID.
  • Measure and indicate flow rates from +0.25 to +40 ft/sec and -0.25 to -40 ft/sec (+0.075 to +12.2 m/sec and -0.075 to -12.2 m/sec) with accuracy of ±2% of reading on liquids with entrained particles or gases of 100 microns or larger and minimum concentrations of 75 ppm.

Transducer (Flow Sensor):
  • The flow sensor shall be single-head, ultrasonic in a stainless steel housing. It shall be installed on the outside of a pipe without interrupting flow. The sensor shall be capable of continuous operation at temperatures from -40°F to 300°F (-40°C to 150°C), and to withstand accidental submersion pressures to 10 psi. Manufacturer's recommended coupling compound and stainless steel mounting clamp shall be included.
  • Shall include 20 ft (6m) Sensor cable, shielded coaxial pair.
  • Shall be capable of extending sensor cable up to 500 ft (152m) without requirement for operator adjustment.
  • Shall be transformer isolated and designed to meet intrinsic safe requirements. Shall be designed for maximum RFI rejection, and include automatic high voltage bleeds for nearby lightning strikes.
  • Sensor shall be rated Non-incendive for Class I, Division 2, Groups A, B, C & D locations.



Additional Information:

  • Item Code: SFM6.1

View Complete details

get quote request a call back
  • DFM 6.1 Doppler Flow Meter
  • DFM 6.1 Doppler Flow Meter
  • DFM 6.1 Doppler Flow Meter
  • DFM 6.1 Doppler Flow Meter
  • DFM 6.1 Doppler Flow Meter
  • DFM 6.1 Doppler Flow Meter
  • DFM 6.1 Doppler Flow Meter
DFM 6.1 Doppler Flow Meter

DFM 6.1 Doppler Flow Meter

Price on Request

Product Brochure

BrandPulsar / Greyline
Application MediaWater
Power Supply10 W maximum
Accuracy+-2% of reading or 0.03 m/s (0.1 ft/s) whichever is greater. Requires solids or bubbles minimum s
Flow Range+-0.03 m/s to 12.2 m/s (+-0.1 ft/s to 40 ft/s) in most applications
Frequency50/60 Hz
Voltage100-240 V
Enclosure HeaterNEMA4X (IP 66) polyester with a clear polycarbonate face
Control RelaysQty 2, rated 5 amp SPDT, programmable flow alarm, and/or proportional pulse
Operating Temperature-23 DegreeC to 60 DegreeC (-10 DegreeF to 140 DegreeF)
DisplayWhite, backlit matrix - displays flow rate,relay states,16-digit totalizer,operating mode
OutputIsolated 4-20mA (1000 ohm load max.) or 0-5 V DC (field selectable)
Pipe SizeAny pipe ID from 12.7 mm to 4.5 m (0.5 in to 180 in)
ConfigurationBuilt-in 5-button keypad with English, French, or Spanish language selection
Shipping Weight6.3 kg (14 lbs)
Data LoggerBuilt-in 26 million point logger with a USB output and Windows software
  • Enhanced performance
  • Easy to install and configure
  • Non-Contacting, clamp-on, ultrasonic sensor
  • Works on a large variety of pipe materials and sizes
  • Large, back-lit flow rate display and totalizer
  • Isolated 4-20mA output
  • 2 Programmable control relays
  • Optional Modbus RTU or HART output
  • 128 MB data logger (26 million points)

View Complete details

get quote request a call back
  • FLOWPLUSE SENSOR Non Invasive , Clamp-On, Flow Sensor
  • FLOWPLUSE SENSOR Non Invasive , Clamp-On, Flow Sensor
  • FLOWPLUSE SENSOR Non Invasive , Clamp-On, Flow Sensor
  • FLOWPLUSE SENSOR Non Invasive , Clamp-On, Flow Sensor
  • FLOWPLUSE SENSOR Non Invasive , Clamp-On, Flow Sensor
FLOWPLUSE SENSOR Non Invasive , Clamp-On, Flow Sensor

FLOWPLUSE SENSOR Non Invasive , Clamp-On, Flow Sensor

Price on Request

Product Brochure

BrandPulsar
ApplicationIndustrial
Supply Voltage1 form "C" (SPDT) rated at 1 A at 24 V DC
Sensor Body Dimensions120 mm x 65 mm x 65 mm (4.75 in x 2.6 in x 2.6 in)
Operating Temperature (Electronics)-20 DegreeC to +70 DegreeC (-4 DegreeF to +158 DegreeF)
Power Supply:18-28 V DC
Weight1.5 kg (3.3 lbs)
Maximum Separation500 m (1,640 ft)
Velocity Range0.3 m/s to 4.0 m/s (0.98 ft/s to 13.12 ft/s) standard version -or- 0.3 m/s to 10 m/s (0.98 ft/s to 3
Pipe Wall ThicknessMetal or rigid pipe up to 20 mm (0.8 in) thick
DESCRIPTION                                          The Pulsar Measurement FlowPulse is a non-invasive clamp-on flow sensor for pipe flow monitoring. It simply clamps to the outside of the pipe and is secured with a screwdriver. Using Doppler technology, the sensor is suitable for applications requiring flow measurement on dirty or difficult liquids. The FlowPulse clamp-on flow sensor fires ultrasound through a variety of pipe wall materials, is refracted at angles across the axis of the flow, and is reflected back from bubbles, particles, and vortices in all directions - the change in frequency is then displayed as flow measurement.                                                                              FEATURES                                                        
  • Non-invasive
  • Minimal installation costs
  • Range of options available
  • Simple Installation
  • Flexible PC software
  • Compatible with a wide range of pipe material
      

View Complete details

get quote request a call back
  • Non Contacting Radar Sensor
  • Non Contacting Radar Sensor
  • Non Contacting Radar Sensor
  • Non Contacting Radar Sensor
Non Contacting Radar Sensor

Non Contacting Radar Sensor

Price on Request

Product Brochure

Mounting TypeSurface Mount
Accuracy+-5 mm
Weight1 kg (2.2 lbs)
Sensor Body MaterialValox 357
Sensor Body Dimensions90 mm x 140 mm (3.54 in x 5.51 in)
Velocity Range0.3 m/s to 6 m/s (0.98 ft/s - 19.7 ft/s)
Maximum SeparationUp to 500 m (1,640 ft)
The dBR Radar transducer range from Pulsar Measurement is a compact FMCW Radar sensor that offers high accuracy, repeatable level measurement, and compatibility with Pulsar Measurement's full range of controllers.

View Complete details

get quote request a call back
  • Non Contacting Intelligent Ultrasonic Transducers
  • Non Contacting Intelligent Ultrasonic Transducers
  • Non Contacting Intelligent Ultrasonic Transducers
  • Non Contacting Intelligent Ultrasonic Transducers
Non Contacting Intelligent Ultrasonic Transducers

Non Contacting Intelligent Ultrasonic Transducers

Price on Request

Product Brochure

Transducer TypeUltrasonic Transducer
BrandPulsar / Greyline
PhaseThree Phase
Voltage240 V AC
Frequency50 Hz
Operating Temperature-40 degree to 80 degree
nput Voltage Range5-15 V DC
Measurement Range125 mm to 15 m (4.9 in to 49.2 ft)
Sensor Body MaterialValox 357 PBT
Mounting ConnectionBSP or 1 in NPT
The dBi Modbus (dBi-M) series of level sensors are the ultimate, low-power, ultrasonic level sensors that benefit from Modbus communication. This series of level sensors features Pulsar Measurement’s world-leading DATEM echo processing power for accurate and reliable level measurement in the most challenging applications, with a suitable measurement range of 125 mm to 15 m (4.9 in to 49.2 ft).

View Complete details

get quote request a call back
  • Non Contacting Ultrasonic Sensors
  • Non Contacting Ultrasonic Sensors
  • Non Contacting Ultrasonic Sensors
Non Contacting Ultrasonic Sensors

Non Contacting Ultrasonic Sensors

Price on Request
Mounting TypeSurface Mount
False Echo RejectionYes
Nominal Sensing Distance3281 ft
Transducer frequency Aboutrange up to 1000km
PulsarNon contacting ultrasonic sensors

Key Features: Proprietary echo processing technology [DATEM] measurement accuracy. Silo level measurement , pump control applications. ATEX & cFMus approvals.

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES