Automobile Industry
We are one of the leading Air Compressor and suppliers in India. All our offerings are known for their precise engineering and longer service life.
Reciprocating Compressors 15HP
Request Callback
₹ 175000 / Piece Get Latest Price
| Power Source | AC Three Phase |
| Maximum Pressure | 12 Bar |
| Power Phase | Three Phase |
| Lubrication Type | Oil Lubricated |
| Pressure | More Than 12 Bar |
| Number of Stages | Two Stage |
| Portability | Stationary |
| Cooling Method | Air Cooled |
| Motor Winding | Copper |
| Control Type | Start-Stop |
| Maximum Flow Rate | 21 - 50 cfm |
| Rental Available | No |
| Spares Available | Yes |
| Is It Portable | No |
| Installation/After Sales Service Available | Yes |
| Warranty | 12 MONTHS |
| Compressor Brand | JESKON |
| Horse Power | 15 hp |
| Tank Capacity | 200 L |
| Air Tank Capacity | 300 L |
Minimum order quantity: 1 Piece
We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients
1 Phase Auto Electrical Test Bench
Request Callback
₹ 145000 / Piece Get Latest Price
| Bench Type | Service Bench |
| Application | Basic Electrical |
| Phase | Single Phase |
| Weight | 85 kgs |
| Brand | Autonics |
| Power Requirements | 220V single phase, 15 Amperes |
| Vice | Heavy duty, fast mounting for alternators and starters |
| Dimensions | 650 (l) x 725 (b) x 550 (h) mm |
Description:
Features:
Instrumentation:
Drive:
Protection:
- Bosch introduces the latest, user-friendly, hi-tech Auto Electrical Test Bench that enables easy, fast and accurate testing of a wide range of alternators and starter motors. This highly compact test bench can be operated at two speeds, ensuring thorough testing at both, higher and lower speeds. The test bench is extremely easy to operate and is an ideal addition to any workshop.
Features:
- Table top model
- Fixed 12V/24V field supply
- Fitted with digital ammeter/voltmeter for easy reading
- Maximum capacity of alternators that can be tested: 75 amps at 12V, 70 amps at 24V
- Provision for checking and testing alternators at 2 speeds: Large V/poly - V groove pulley for high speeds, Small V - pulley for low speeds
- Starter free spin testing directly from battery
- Alternator loading through four rotary switches
- Starter short-circuit test facility available
- Battery Charging facility available during the alternator testing process
- Vehicle simulation of battery charging through alternator
- Provided with 12V battery supply for testing a wide range of electrical components like horns, bulbs, relays child parts of starters and alternators
Instrumentation:
- Alternator output current - Digital Panel meter 0-100 Amps DC
- Alternator output current - Digital Panel meter 0-100 V DC
Drive:
- 220V single phase, 2HP, 1440 RPM induction motor
- Protected with circuit breakers
Protection:
- Circuit breakers incase of sudden surges in voltage
- Fuses provided for protection of rectifiers, battery etc
BML 2415 Battery Charger
Request Callback
₹ 25000 / Piece Get Latest Price
| Output Voltage | 12V |
| Output Current | 20A |
| Battery Type | Lithium-ion, Lead Acid, VRLA/SMF |
| Features | Auto Cut-off |
| Weight | Approx. 7 kg |
| Brand | Bosch |
| Model | BML 2415 |
| Charging Current | Max. 15A by 12V,Max. 7.5A by 24V |
| Length Of Charging Leads | 2 Meter |
| Input Power Supply | 220-240 V |
| Suitable for | Conventional Lead Acid and Maintenance free Batteries |
| Dimension | 260 x 160 x 250 mm (W x H x L) |
The BML 2415 is a small, light, portable electronic battery charger for application to workshops, vehicle fleets, and secondhand car dealers. It follows by charging the WU characteristic charging curves and delivers a charging current free of Interference and power picks. The device is suitable to be applied to 12 & 24 Volt on board systems.
Features:
Features:
- A solid charger for workshops which can be applied to 12 Volt and 24 Volt on board electrical systems
- More performance characters are
- Overcharging protection
- Reverse polarity protection
- Floating- mode operation
- Charging of deep exhausted batteries
- Compact finishing in product design
- Charging without voltage peaks, directly at the electric system
- Effective and careful charging procedure due to temperature compensation
- Adaptable charging current due to infinitely variable charging current adjustment
- Display for charging current
- Charging status, reverse polarity, failure, operation controlled by LED´s
Bosch Battery Charger for 2 Wheelers
Request Callback
₹ 25000 / Piece Get Latest Price
| Output Voltage | 14.4 V +/- 0.3 V (Charging mode) / 13.8 V +/- 0.3 V (Standby mode) |
| Brand | Bosch |
| Model | BAT 304-IN |
| Number of Channels | 4 Channe |
| Input Nominal Voltage | 230 V AC (Voltage range = 170-270 V AC) |
| Input Frequency | 50 Hz (Frequency range = 47-53 Hz) |
| Input Current | 5A max |
| Output Current | 2 A/ 4 A max selectable |
| Net Weight | ~4.5 kgs |
| Dimension of Enclosure | 220 x 190 x 130 (L x W x H mm) |
Features:
- Advanced high frequency SMPS design charger with 80% typical efficiency
- Constant voltage charging system to reduce charging time and enhance battery life
- Parallel charging of different capacity batteries
- Short circuit protection (output side) with auto recovery
- Reverse Polarity protection (output side) with LED indication
- Over voltage protection on the input side
- Automatic thermal shutdown and recovery
- Charging current setting based on battery capacity (2.5Ah - 9Ah)
- Light weight, compact and silent operation
Drive Through Bus Wash
Request Callback
₹ 1925000 / Piece Get Latest Price
Product Brochure
| Maximum Wash Height | 4,1 (m) |
| Minimum Wash Height | 2,6 (m) |
| Minimum Bay Size | H5,6 / W6,1 / L8,5 m |
| Water Consumption | 180 / 220 (l/wash) |
| Shampoo consumption | 40 / 60 (ml/wash) |
Description:
Features:
- 4HWD300 is the compact model of the new wash series for bus fleets, HEAVYWASH DRIVE THROUGH, by ISTOBAL. This model has been designed taking into account the individual needs of transport companies: compact wash units with a strong design and reliable mechanics to guarantee an efficient wash.
- The structure of the machine is made of a hot-dip galvanised steel. 4HWD300 comes standard with 4 vertical brusheswashing asymmetrically and 1 horizontal brush. In this design, the front and rear vehicle areas are washed by the overlapping of the vertical brushes, the sides are cleaned with an overlapping brush wash, and the roof wash adapts to different heights thanks to the lifting system of the horizontal brush.
- The control panel and the chemical product metering system are built-in on the structure, which makes the equipment both autonomous and compact. The unit provides wash configuration versatility, gentle and precise brush movements for a good finish, a front mirror protection program, a single or continuous cycle operation and underchassis wash integrated in the unit as an optional.
- The unit provides wash configuration versatility, gentle and precise brush movements for a good finish, a front mirror
- protection program, a single or continuous cycle operation and underchassis wash integrated in the unit as an optional.
Features:
- Speed detection: Thanks to the three pairs of photocells, it detects when the vehicle overcomes a speed limit. When it happens, front brushes open automatically before the vehicle reaches them, or the equipment stops and stay in emergency mode.
- Split front brushes: Patented system to avoid damaging the front mirrors lifting the upper part of the front brushes, but keeping the lower part brushing the complete front of the vehicle.
- Roof brush: The horizontal brush assures a perfect roof wash for a wide variety of vehicle heights, thanks to the 1,5 m lifting system integrated in the structure of the machine.
X
Product Videos
Transit Time Flow Meter
Get QuoteContact Us
S.P. Singh (Director)
Jeskon Systems Private Limited
P-9, Sukhliya, Near Community Hall
Indore - 452001, Madhya Pradesh, India
Send Email